Tag Archives: Processing

Arduino: Controlling the Robot Arm

So the arm is wired into Arduino as per the previous post, Arduino: Modifying a Robot Arm and hopefully this has worked. In this next part...

Using Processing to Send Values using the Serial Port to Arduino

In this write-up, I’ll show how to create a value in Processing and then send this value over the serial port to the Arduino. In the...

Arduino + Processing – 3D Sensor Data Visualisation

So following on from my previous posts about visualising sensor data in Processing, I’m now looking at drawing 3D representations of the data recorded from the...

Arduino + Processing – Make a Radar Screen – Part 3: Visualising the Data from Sharp Infrared Range Finder

So I had some luck with getting the Sharp Infrared range finder working and I’ve now plugged this on to my servo rig to see if...

Arduino + Processing: Make a Radar Screen to Visualise Sensor Data from SRF-05 – Part 2: Visualising the Data

This is where all the work is done to read an interpret the values from the servo and the sensor. If the readings are to erratic...

Arduino + Processing – Make a Radar Screen to Visualise Sensor Data from SRF-05 – Part 1: Setting up the Circuit and Outputting Values

First things first, we need to build our circuit. This is the easy bit! We’ll be using the Arduino to control a servo that will rotate...

Arduino – Basic Theremin meets Processing!

My last theremin involved a small speaker. Now I’ve replaced the speaker with my PC, using processing to pick up the values from the SRF05 ultrasound...

Arduino & Processing – Getting values from SRF05 ultrasound sensor & serial port

I’ve started to delve into Processing and passing values between Processing and Arduino. If you’re wondering what Processing is, basically its an open source programming language...